CBS Performance Automotive
52 County Road 5, Divide, CO 80814


Search our Site
LEADING THE HIGH PERFORMANCE EXHAUST INDUSTRY
GIBSON performance exhaust systems meet or exceed the performance advantages provided by all other systems on the market. They are the industry's most cost-effective, reliable, and trouble free performance exhaust system. The superior quality of GIBSON high-flow performance exhaust systems will provide you with increased hill-climbing and passing power - up to 25% more useable horsepower, improved acceleration - power and response, improved low and midrange performance - increased torque, improved fuel economy, reduced back pressure for cooler engine operating temperatures and extended engine life, and all retain stock emissions equipment - 50 state legal.

Applications:
Systems for all popular fuel injected trucks and sport utility vehicles, CHEVY/GM, FORD and DODGE. 2WD stock or lowered, 4WD stock or raised, 6 cylinders and 8 cylinders.
  • More useable pulling power and torque.
  • Improved low and mid range performance.
  • Absolute best fitting system.
  • 50 state emission legal.
  • Limited Lifetime Warranty.

SINGLE CAT-BACK EXHAUST SYSTEMS
Gibson single cat-back exhaust systems are designed for fuel injected vehicles to give you maximum increased horsepower and torque. Each kit bolts directly behind the catalytic converter. ALUMINIZED FEATURES: Aluminized 14 gauge headpipe and mandrel-bent tailpipe, exit pipe, Gibson Superflow muffler - aluminized and fully welded, stainless steel tip and all mounting hardware.

STAINLESS FEATURES: Stainless steel headpipe, mandrel-bent tailpipe and exit pipe, stainless steel Gibson Superflow muffler - which is fully welded, stainless steel tip and all mounting hardware.

Single Cat-Back Aluminized Stainless
'88 - '03 Chevy/GM-S10 $309 $419
'75 - '06 Chevy/GM $359 $509
'96 - '06 Chevy/GM Dual Inlet $449 $639
'98 - '06 Chevy/GM Single Inlet $359 $509
'79 - '06 Dodge $359 $509
'88 - '06 Ford $359 $509
'87 - '06 Jeep $309 $419

DUAL CAT-BACK EXHAUST SYSTEMS
Power • Torque • Response • Improved Fuel Economy • Lifetime Warranty
Each system is dyno and dynamically tested and precision fabricated for your application to assure maximum power and torque over the widest power band. Gibson dual cat-back systems are designed for fuel injected vehicles, and bolt on directly behind the catalytic converter.

Features: Aluminized 14 gauge; headpipe & dual mandrel-bent tailpipes, dual exit pipes, Gibson Superflow Muffler which is aluminized and fully welded, and all mounting hardware.

Split Rear Exit
Tips optional
Aluminized Stainless
'88 - '99 Chevy GM Single Inlet $429 $579
'96 - '06 Chevy/GM Dual Inlet $519 $689
'94 - '06 Dodge $429 $579
'88 - '06 Ford $429 $579

Super Truck Side Exit
Tips Included
Aluminized
'88 - '06 Chevy/GM $359
'94 - '06 Dodge $359
'88 - '06 Ford $359

Dual Sport Truck Side Exit
Tips optional
Aluminized Stainless
'88 - '99 Chevy/GM Single Inlet $429 $579
'96 - '06 Chevy/GM Dual Inlet $519 $689
'94 - '06 Dodge $429 $579
'88 - '06 Ford $429 $579
LIFETIME WARRANTY
Satisfaction Guaranteed:
30 Day Money-Back Refund
COD not available on Gibson products.

Precision Engineered HEADERS Starting at $429
GIBSON Headers are precision engineered to give you maximum performance in the low and mid range rpm highway speeds. All headers bolt on easily and quickly to the factory y-pipe. Headers include all mounting hardware and premium gaskets.
The GIBSON header design delivers three distinct advantages:
    1. Engine operation temperatures are reduced by accelerating exhaust gas from the cylinder through scavenging. This allows a greater charge of fresh air-fuel mixture into the combustion chamber. That mixture has a lower “flash point” which ignites at a lower temperature. The result of all of these is a cooler running engine.

    2. Gibson headers create reduced restriction which allows the engine to dissipate heat more rapidly... a cooler running engine produces more horsepower and will live longer.

    3. Because the engine breathes more freely, you can use less throttle, resulting in greatly improved fuel economy and response.

FEATURES:

  • Extra-Thick Precision Heavy Duty Die-Cut Flange
  • Premium Gaskets And Hardware
  • O.E.M. Type Connection Bolts Directly to Factory Y-Pipe
  • Computer Controlled Mandrel-Bent 14-Gauge Tubing
  • Nickel Chrome Plating or Stainless Steel
  • Quick and Easy Bolt-on Installation
  • Great For Lowered or Raised Vehicles
  • Improved Acceleration and Pulling Power
  • Cooler Engine Operating Temperature
  • More Usable Horsepower
  • 50 State Smog Legal
  • Retains all stock emissions equipment

LIFETIME WARRANTY
Satisfaction Guaranteed:
30 Day Money-Back Refund
COD not available on Gibson products.

Email: Contact INFO
Telephone: Contact INFO
Designed by: Jolly German Internet
©2004-2011 CBSPERFORMANCE.COM